REFRIGERATION and HVAC EQUIPMENT
Metal parts, assemblies and housings for refrigeration, air conditioning
and ventilation equipment
PRITZ DEVELOPMENT manufactures metal components, housings, panels, mounting components and
assemblies for manufacturers of refrigeration and HVAC equipment.
We manufacture products according to the customer’s drawings, 3D models, specifications and
technical requirements — from individual parts to complete metal assemblies and finished products.
REFRIGERATION and HVAC EQUIPMENT
PRITZ DEVELOPMENT manufactures both individual parts and finished assemblies intended for
manufacturers of refrigeration and HVAC equipment.
The full production cycle includes laser cutting, CNC punching, CNC bending, stamping, welding,
powder coating and assembly.
Housings for refrigeration and air conditioning equipment
Production of metal housings and guards for various types of equipment:
- refrigeration equipment housings;
- outdoor and indoor unit housings;
- air handling unit housings;
- housings for air conditioners and air conditioning systems;
- condensing unit housings;
- refrigeration unit housings;
- protective guards and panels;
- service and technical covers;
- bases and mounting frames.
Panels and cladding components
We manufacture flat and bent metal components that form the outer housing of equipment:
- side panels;
- front and rear panels;
- top and bottom covers;
- service panels;
- mounting panels;
- doors and hatches;
- decorative and protective components;
- panels with ventilation openings;
- perforated panels;
- internal lining components.
Ventilation components and air system parts
We manufacture metal air duct and assembly components for ventilation equipment:
- ventilation panels;
- frames and flanges;
- transition pieces;
- connecting components;
- mounting brackets;
- fan guards;
- protective grilles;
- perforated components;
- guides and fastening components;
- internal partitions and mounting components.
Parts and assemblies for refrigeration systems
PRITZ DEVELOPMENT can manufacture individual metal components and welded assemblies used in the production of refrigeration machinery and units.
Main product types:
- mounting plates;
- support components;
- equipment bases;
- frames and support frames;
- brackets;
- fastening panels;
- component holders;
- protective guards;
- housings for electrical and technical compartments;
- mounting components for compressors and fans;
- panels for equipment installation;
- cable-related and technical components;
- welded assembly units.
COMPONENTS FOR HVAC SYSTEMS
PRITZ DEVELOPMENT’s production capabilities enable the manufacture of metal components for heating, ventilation and air conditioning systems.We manufacture:
Housing components
Housings, covers, panels, doors, technical access hatches and protective guards.
Mounting components
Brackets, supports, mounts, mounting plates, guides and connecting components.
Ventilation components
Frames, panels, protective grilles, perforated components, flanges and parts for air distribution assemblies.
Internal components
Partitions, holders, guides, mounting plates and other components of the equipment’s internal structure.
Welded assemblies
Support frames, frames, bases, support structures and other three-dimensional metal structures.
SHEET METAL PRODUCTS
Sheet metal processing forms the basis for manufacturing components for HVAC and refrigeration equipment.
Depending on the product design, we can carry out successive processing operations on the same part across several production departments:
Laser cutting → CNC punching → CNC bending → welding → powder coating → assembly
This allows us to manufacture individual parts as well as complete metal assemblies.
PRODUCTION CAPABILITIES
Working area — up to 3000 × 1500 mm.
We process:
- carbon steel;
- stainless steel;
- aluminium;
- galvanized steel;
- other materials on request.
Working area — up to 3000 × 1500 mm.
The process is particularly effective in the series production of panels, ventilation components, mounting plates and housing parts.
Working area — up to 3000 × 1500 mm.
Bending is used in the production of:
- housings;
- panels;
- covers;
- doors;
- brackets;
- profiles;
- mounting components;
- protective guards.
Presses with the following capacities are available: 25 / 40 / 63 / 160 t
The process is suitable for manufacturing standard metal components, fasteners, housing parts and products manufactured in series.
Available technologies:
MIG / MAG / TIG / MMA / spot welding / laser welding
Materials:
- carbon steel;
- stainless steel;
- galvanized steel;
- aluminium;
- other materials on request.
Maximum welded product dimensions — up to 2000 × 1000 × 1000 mm.
The equipment allows large housing components and welded assemblies to be coated.
Product dimensions — up to 2900 × 1500 × 1000 mm.
Maximum weight — up to 100 kg.
The color and coating type are determined by the customer’s technical requirements.
Depending on the project, we perform:
- assembly of housing components;
- installation of panels;
- joining of parts;
- installation of fasteners;
- assembly of metal units;
- preparation of finished products for delivery.
ADVANTAGES OF PRODUCTION AT PRITZ DEVELOPMENT
One manufacturing partner for the entire product
Full cycle
Laser cutting, punching, bending, stamping, welding, painting and assembly.
Working from customer documentation
Production of parts and products based on drawings, 3D models and specifications.
Series production repeatability
Stable production of identical components and products.
Manufacturing trial units
Verification of the design and manufacturing process before launching series production.
Assembly of finished products
The option to receive a finished assembly or product instead of individual parts.
Quality control
Product inspection during production and before delivery.
ISO 9001
An implemented quality management system confirmed by certification.
A company headquartered in Poland
PRITZ DEVELOPMENT is headquartered in Katowice and focuses on B2B projects in Poland and EU countries.
HOW COOPERATION BEGINS
From a drawing to a finished furniture component
01 — Documentation
We receive drawings, 3D models and specifications.
02 — Technical analysis
We check the design and manufacturability.
03 — Quotation
We determine the production process sequence and cost.
04 — Trial unit / pre-series batch
We manufacture a trial unit or a small batch.
05 — Approval
We agree on the design and quality.
06 — Series production
We launch regular production.
07 — Assembly and inspection
We assemble the units and inspect the finished products.
08 — Packaging and delivery
We prepare the products for shipment.
Refrigeration and HVAC equipment
We will assess product manufacturability, propose a production process and prepare a manufacturing cost calculation.